TM
MORRISONS
OTHER MANIFOLDS
This is a selection of photos of other manifolds that we have
designed & manufactured over the last 20 years.
designed & manufactured over the last 20 years.
HOLDEN V8 VN 5L- EFI
8 single throttles, cast alum manifolds,
Billet fuel rail & spun alum ram tubes.
8 single throttles, cast alum manifolds,
Billet fuel rail & spun alum ram tubes.
CRYSLER V8 fuel injection
with twin throttles & twin ram tube
holders & spun alum ram tubes.
with twin throttles & twin ram tube
holders & spun alum ram tubes.
18 deg Chev V8 Xram
This manifold was build late 1980s.
Cast 1 piece valley plate, twin port
long cast runners, rectangular
butterflies & cast ram tubes.
This manifold was build late 1980s.
Cast 1 piece valley plate, twin port
long cast runners, rectangular
butterflies & cast ram tubes.
This manifold was cast in both alum &
magnesium. The throttles & runners
had 2 different sizes for running on
either petrol or methanol.
These were used for racing.
magnesium. The throttles & runners
had 2 different sizes for running on
either petrol or methanol.
These were used for racing.
Ford V8
Holden Mk2
HOLDEN V6- 2007
We manufacture the top half of this
manifold - cast upper manifold with bolt
on throttles, custom linkages. We have
an aluminium plate between the
throttles & ram tubes to allow for air
cleaner.
It bolts onto the original base manifold and
uses the original fuel rail.
We manufacture the top half of this
manifold - cast upper manifold with bolt
on throttles, custom linkages. We have
an aluminium plate between the
throttles & ram tubes to allow for air
cleaner.
It bolts onto the original base manifold and
uses the original fuel rail.
HARLEY injected throttle,
manifold
All cast & m/c aluminium
manifold
All cast & m/c aluminium
 |
 |
Nissan SR20 - 4 cyl.
Cast aluminium manifold, 8 separate
throttles & spun ram-tubes -made specially
for a customer.
throttles & spun ram-tubes -made specially
for a customer.
This LS1-C5R X-RAM MANIFOLD is
the 1st manifold in our series. This was built to suit
the C5 race heads and has overhead injectors. We
are currently working on LS2, LS3 & LS7 designs.
These will have lower injectors in the cast
manifold suitable for performance & street use.
the 1st manifold in our series. This was built to suit
the C5 race heads and has overhead injectors. We
are currently working on LS2, LS3 & LS7 designs.
These will have lower injectors in the cast
manifold suitable for performance & street use.
